Difference between revisions of "My first app"

Revision as of 22:34, 29 December 2016

General information

Abstract

MyFirstApp is an OSBP application created purely from models, based on OS.bee Software Factory.

If you want to have a basis on which you can explore OS.bee this is a good starting point. You can try to modify models and see the resulting changes. The models show everything from persistence up to the UI and demonstrate a lot of the stunning features and simplicity of MDSD with OS.bee.

The requirements, app generation steps, guiding of start the app, tips of configuration are written in this introduction.

Copyright Notice

All rights are reserved by Compex Systemhaus GmbH. In particular, duplications, translations, microfilming, saving and processing in electronic systems are protected by copyright. Use of this manual is only authorized with the permission of Compex Systemhaus GmbH. Infringements of the law shall be punished in accordance with civil and penal laws. We have taken utmost care in putting together texts and images. Nevertheless, the possibility of errors cannot be completely ruled out. The Figures and information in this manual are only given as approximations unless expressly indicated as binding. Amendments to the manual due to amendments to the standard software remain reserved. Please note that the latest amendments to the manual can be accessed through our helpdesk at any time. The contractually agreed regulations of the licensing and maintenance of the standard software shall apply with regard to liability for any errors in the documentation. Guarantees, particularly guarantees of quality or durability can only be assumed for the manual insofar as its quality or durability are expressly stipulated as guaranteed. If you would like to make a suggestion, the Compex Team would be very pleased to hear from you.

(c) 2016-2024 Compex Systemhaus GmbH

License information

The OS.bee Software Factory is distributed under a commercial license.

The product itself is based on the OSBP Software Factory which is an Eclipse Project. In addition, the software depends on several other open source projects, and the entire list of licenses used can be found here.

Requirements

Please install the OS.bee Software Factory first. Instructions for the installation can be found here.

How to generate MyFirstApp

MyFirstApp is generated from within Eclipse.

1. In Project Explorer, right click the mouse, then select New -> Other.
   
   
   
   
   
   
2. Select OSBP Projects -> My First App and then click on Next.
   
   
   
   
   
   
3. Now you see the general configuration window for MyFirstApp.
   
   
   
   
   
   
   • Click on Next.
     
     
     
     
4. The JDNI Data Source can be set up on this page. Click Next when done.
   
   
   • The default value is h2memory, which saves all data in memory.
     
     
   • If you want to use a different JDNI Data Source, e.g., MySQL or Oracle, you can change it later.
     
     
     
     
     
     
5. Setup for the mock data generation. Click on Next.
   
   
   
   
   
   
6. Choose the location where you would like to save the files of MyFirstApp.
   
   
   • You can use the default location:
     
     
     
     
     
     
   • Or you can specify your own folder by unchecking the checkbox:
     
     
     
     
     
     
   • Click on Next when done.
     
     
     
7. The XMS Memory is usually ¼ of total physical memory. The desktop link which will be used later to start the application can also be found here.
   
   
   
   
   
   
   • Click on Finish to start the generation step.
     
     
     
     
     
     
8. When the window disappears, you can see in Project Explorer that all projects of MyFirstApp have been established.
   
   
   
   
   
   
   • Please note that up until this point, the application has not yet been completely generated. Typically, the workspace is still being built (see the bottom right corner of the window). Wait until this process has completed.
     
     
     
     
     
     
9. When the Building Workspace message disappears, the generation of MyFirstApp is complete. Project Explorer should now look like this:
   
   
   
   
   
   

How to start MyFirstApp

• Now we are ready to start MyFirstApp.

• If you want to change any setting before starting the app, this will help : How to configure MyFirstApp.

Launch Eclipse Application

1. Open myfirstapp.product file from org.osbp.myfirstapp.product.
   
   
   
   
   
   
2. We should check the validation first, please click the button on right top.
   
   
   
   
   
   
3. Click OK.
   
   
   • No problems were detected means it is ready to run, otherwise fix the problem first.
     
     
     
     
     
     
4. Now click Launch an Eclipse application to start MyFirstApp.
   
   
   
   
   
   
5. Open console view to see if the progress is finish, the last sentence should be TRIGGER DONE....
   
   
   
   
   
   

Start MyFirstApp in Browser

Now you could start this page from your browser:
http://localhost:8081/myfirstapp

1. Log in
   
   
   1. Log in Page will be shown first.
      
      
      
      
      
      
   2. Enter the user name and password in log in page, e.g. Admin, Admin, save the password and log in.
      
      
      
      
      
      
2. Welcome page
   
   
   • Now you could see the Welcome page.
     
     
     
     
     
     
3. Menu list
   
   
   • On the left top of the page, just beside AdminIT is the MENU button, click it to pop up the menu.
     
     
   • There are 2 main entry: Menu and Persons.
     
     
     
     
     
     
   1. Menu
      
      
      • 3 subentries under Menu:
        
        
        1. Persons:
           
           
           
           
           
           
           
        2. Company:
           
           
           
           
           
           
           
        3. Company group:
           
           
           
           
           
           
           
   2. Persons
      
      
      • Click the Persons entry, the table All person will be shown directly in the menu list.
        
        
        
        
        
        
4. Tab list
   
   
   • On the right top of the page, there are some tabs, by clicking them, you could easily to switch the pages.
     
     

How to configure MyFirstApp

MyFirstApp could be started without configuration, this part is optional. If you want to change the default settings, continue to read.

• All Configuration do with Eclipse.

Select OSBP Application Project

• The first step of the configuration is to change the Product Configuration from workspace to org.osbp.myfirstapp.product in Preferences -> OSBP Application Configuration. Please notice that, this will be not saved, please do this step every time before you start to configure MyFirstApp.
  
  
  
  
  
  

• The Desktop URL link could be found here.
  http://localhost:8081/myfirstapp
  
  
  
  
  
  
  

Detail Configuration

Click > before OSBP Application Configuration to extend the tree.

1. Configure Authentication.
   
   
   
   
   
   
2. Configure Bpm Engine.
   
   
   
   
   
   
3. Configure Controls.
   
   
   
   
   
   
4. Configure Data Sources.
   
   
   • All data sources could be set up here:
     
     
     
     
     
     
   • If you want to use other data sources, please configure it first. Click + to extend the tree, and then set all necessary information, e.g. Server Name, Server Port, Database Name, etc.
     
     
     
     
     
     
5. Configure Email.
   
   
   
   
   
   
6. Configure External Data Sources.
   
   
   
   
   
   
7. Configure Localization.
   
   
   
   
   
   
8. Configure PersistenceUnits.
   
   
   • All details about Persistence Units could be changed here.
     
     
     
     
     
     
   • Click + to extend the tree, and then you could change the data source, DDL Generation, etc.
     
     
     
     
     
     
     
     
9. Configure Project Wizard.
   
   
   
   
   
   
10. Configure Service Communication.
    
    
    
    
    
    
11. Configure Verify Dependencies.
    
    
    • If you see all green points, it means MyFirstApp is ready to start without dependencies’ error; if you see the red point, fix the error before starting.