My first app

From OS.bee documentation
Revision as of 09:31, 29 November 2016 by Yang (Talk | contribs) (→‎Detail Configuration)

Jump to: navigation, search

General information

Copyright Notice

All rights are reserved by Compex Systemhaus GmbH. In particular, duplications, translations, microfilming, saving and processing in electronic systems are protected by copyright. Use of this manual is only authorized with the permission of Compex Systemhaus GmbH. Infringements of the law shall be punished in accordance with civil and penal laws. We have taken utmost care in putting together texts and images. Nevertheless, the possibility of errors cannot be completely ruled out. The Figures and information in this manual are only given as approximations unless expressly indicated as binding. Amendments to the manual due to amendments to the standard software remain reserved. Please note that the latest amendments to the manual can be accessed through our helpdesk at any time. The contractually agreed regulations of the licensing and maintenance of the standard software shall apply with regard to liability for any errors in the documentation. Guarantees, particularly guarantees of quality or durability can only be assumed for the manual insofar as its quality or durability are expressly stipulated as guaranteed. If you would like to make a suggestion, the Compex Team would be very pleased to hear from you.

(c) 2016-2024 Compex Systemhaus GmbH

License information

The OS.bee Software Factory is distributed under a commercial license.

The product itself is based on the OSBP Software Factory which is an "Eclipse Project". In addition, there are many other open source projects combined and the whole bunch of license used is listed "here".

OS.bee Software Factory

Please install OS.bee Software Factory first. Introduction of installation could be found "here".

Generation of MyFirstApp

Generate MyFirstApp

  • MyFirstApp could be generated from Eclipse: in Project Explore, right click the mouse -> New -> Other.
    Mfa 01 inst new.png
  • Select OSBP Projects -> My First App -> Next.
    Mfa 02 inst sel wiz.png
  • Now you start the installation window for MyFirstApp:
    Mfa 03 inst p1.png
  • The default JDNI Data Source is h2memory, which save all data in memory. If you want to use other JNDI Data Source, e.g. MySQL or Oracle, you can change it later.
    Mfa 03 inst p2.png
  • Set for the Mock Data generation.
    Mfa 03 inst p3.png
  • Choose which location you would lick to save the files of MyFirstApp. You can use the default directory:
    Mfa 03 inst p4 1.png
  • or your own directory:
    Mfa 03 inst p4 2.png
  • The XMS Memory is usually ¼ of total physical memory.
    Mfa 03 inst p5.png
  • Click finish to start the generation step:
    Mfa 03 inst run.png
  • When the window disappears, you could see in Project Explorer, all projects of MyFirstApp are established.
    Mfa 04 inst pe.png
  • Please notice till now it is not complete finish, normally it's still building workspace (see the right bottom corner), wait until it completed.
    Mfa 05 inst bw.png
  • When the <Building Workspace> symbol disappears, the generation of MyFirstApp is finish. Project Explorer should be looked like this:
    Mfa 06 inst pe finish.png

Configuration

Change Product Configuration

  • The first step of the configuration is changing the Product Configuration from workspace to org.osbp.myfirstapp.product in Preferences -> OSBP Application Configuration. Please notice that, this will be not saved, please do this step every time before you start to configure MyFirstApp.
    Mfa 10 conf ac 2.png


Detail Configuration

  • Click OSBP Application Configuration to extend the tree.
  • One important step before start MyFirstApp is Verify Dependencies, which at the end of the tree. If you see all green points, it means MyFirstApp is ready to start without dependencies’ error; if you see the red point, fix the error before starting.
    Mfa 21 conf vd.png
  • If you want to do the detail configuration for Authentication, Bpm Engine, Controls, Data Sources, Email, External Data Sources, Localization, PersistenceUnits, Project Wizard and Service Communication, you could read the following part. It is not necessary for starting MyFirstApp, otherwise, you can skip this part.
  1. Configure Authentication
    Mfa 11 conf auth.png
  2. Configure Bpm Engine
    Mfa 12 conf bpm.png
  3. Configure Controls
    Mfa 13 conf control.png
  4. Configure Data Sources
    • All data sources could be set up here:
      Mfa 14 conf ds 1.png
    • If you want to use other data sources, please configure it first. Click + to extend the tree, and then set all necessary information, e.g. Server Name, Server Port, Database Name, etc.
      Mfa 14 conf ds 2.png
  5. Configure Email
    Mfa 15 conf email.png
  6. Configure External Data Sources
    Mfa 16 conf eds.png
  7. Configure Localization
    Mfa 17 conf loc.png
  8. Configure PersistenceUnits
    • All details about Persistence Units could be changed here.
      Mfa 18 conf pu 1.png
    • Click + to extend the tree, and then you could change the data source, DDL Generation, etc.
      Mfa 18 conf pu 2.png

      Mfa 18 conf pu 3.png
  9. Configure Project Wizard
    Mfa 19 conf pw.png
  10. Configure Service Communication
    Mfa 20 conf sc.png

Start MyFirstApp

Launch Eclipse Application

  • Open myfirstapp.product file from org.osbp.myfirstapp.product:
    Mfa 30 run product.png
  • We should check the validation first, please click the button on right top:
    Mfa 31 run pd validate.png
  • No problems were detected means it is ready to run, otherwise fix the problem first.
    Mfa 32 run validation ok.png
  • Now click Launch an Eclipse application to start MyFirstApp.
    Mfa 33 run launch.png
  • Open "console" to see if the progress is finish, the last sentence should be TRIGGER DONE....
    Mfa 34 run console.png

Start MyFirstApp in Browser

  • Now you could start this page from your browser:

http://localhost:8081/myfirstapp

  • Log in Page will be shown first.
    Mfa 35 run login 1.png
Log in
  • The log in details could be found in authentication.entitymock file in org.osbp.myfirstapp.model.entitymock\models\.
    Mfa 35 run login auth.png
  • Enter the user name and password in log in page, e.g. Charles, Charles, save the password and log in.
    Mfa 35 run login 2.png
Welcome page
  • Now you could see the Welcome page.
    Mfa 36 run welc.png
Menu list
  • On the left top of the page, just beside AdminIT is the MENU button, click it to pop up the menu.
  • There are 2 main entry: Menu and Persons.
    Mfa 37 run menu.png
Menu
  • 3 subentries under Menu:
    • Persons:
      Mfa 38 run pers menu.png

      Mfa 38 run pers.png
    • Company:
      Mfa 39 run comp menu.png

      Mfa 39 run comp.png
    • Company group:
      Mfa 40 run compGrp menu.png

      Mfa 40 run compGrp.png
Persons
  • Click the Persons entry, the table All person will be shown directly in the menu list.
    Mfa 41 run pop pers.png
Tab list
  • On the right top of the page, there are some tabs, by clicking them, you could easily to switch the pages. Default tabs are OPEN and WELCOME.
OPEN
  • OPEN tab is the first tab. Click it, the Open perspective menu will be shown. Perspectives such as Datainterchange, BI, BPM etc. could be selected here.
    Mfa 42 run open.png
  • TODO: the perspective pages should be added later.
Retrieved from "https://download.osbee.org/documentation/index.php?title=My_first_app&oldid=566"