My smart shop

From OS.bee documentation
Revision as of 10:50, 1 December 2016 by Yang (Talk | contribs)

Jump to: navigation, search

General information

Copyright Notice

All rights are reserved by Compex Systemhaus GmbH. In particular, duplications, translations, microfilming, saving and processing in electronic systems are protected by copyright. Use of this manual is only authorized with the permission of Compex Systemhaus GmbH. Infringements of the law shall be punished in accordance with civil and penal laws. We have taken utmost care in putting together texts and images. Nevertheless, the possibility of errors cannot be completely ruled out. The Figures and information in this manual are only given as approximations unless expressly indicated as binding. Amendments to the manual due to amendments to the standard software remain reserved. Please note that the latest amendments to the manual can be accessed through our helpdesk at any time. The contractually agreed regulations of the licensing and maintenance of the standard software shall apply with regard to liability for any errors in the documentation. Guarantees, particularly guarantees of quality or durability can only be assumed for the manual insofar as its quality or durability are expressly stipulated as guaranteed. If you would like to make a suggestion, the Compex Team would be very pleased to hear from you.

(c) 2016-2024 Compex Systemhaus GmbH

License information

The OS.bee Software Factory is distributed under a commercial license.

The product itself is based on the OSBP Software Factory which is an "Eclipse Project". In addition, there are many other open source projects combined and the whole bunch of license used is listed "here".

OS.bee Software Factory

Please install OS.bee Software Factory first. Introduction of installation could be found here.

How to generate MySmartShop


MySmartShop could be generated from Eclipse.

  1. In Project Explorer, right click the mouse -> New -> Other.

    Mfa 01 inst new.png



  2. Select OSBP Projects -> My First App -> Next.

    Mss 02 inst sel wiz.png



  3. Now you start the generation window for MySmartShop. Select My Smart Shop project:

    Mss 03 inst p1.png



    • The Theme of UI can be changed. We use the default value osbp - Classic - Classic in this case.

      Mss 03 inst p2.png



    • Click Next.

      Mss 03 inst p3.png



  4. The JDNI Data Source could be set up on this page.

    • The default value is h2memory, which save all data in memory.

    • You can also change it to othe JDNI Data Sources, e.g. MySQL, Oracle, etc. Please configure them before start the app: How to configure OSBP Application.

      Mss 03 inst p4.png



    • Click Next.

      Mss 03 inst p4 2.png



  5. Set for the Mock Data generation. Click Next.

    Mss 03 inst p5.png



  6. Choose which location you would lick to save the files of MySmartShop.

    • You can use the default directory:

      Mss 03 inst p6 1.png



    • or your own directory:

      Mss 03 inst p6 2.png



    • Click Next.


  7. The XMS Memory is usually ¼ of total physical memory. The desktop link which will be used late by starting app could be also find here.
    • If there is any other OSBP app already generated, the default port 8081 should be alrealy used for it. Please change the port to avoid the conflict.

      Mss 03 inst p7.png



    • Click Finish to start the generation step.

      Mss 03 inst run.png



  8. When the window disappears, you could see in Project Explorer, all projects of MySmartShop are established.

    Mss 04 inst pe.png



    • Please notice till now the progress is not complete finish, normally it's still building workspace (see the right bottom corner), wait until it completed.

      Mss 05 inst bw.png



  9. When the Building Workspace symbol disappears, the generation of MySmartShop is finish. Project Explorer should be looked like this:

    Mss 06 inst pe finish.png