Peripheral Devices
From OS.bee documentation
Contents
Cash Register Peripherals
Epson Printer and Cashdrawer
If you want to work with Epson-Seiko cash register peripherals some extra steps are necessary:
- Download and unzip the ADK from the following site: Epson Biz
- You must pass a registration process on the Epson site
- Install the ADK
- From the start menu launch SetupPos and configure the physical hardware according to the Epson manuals
- Save the configuration and note the path to the configuration file. The content of this xml file looks something like this:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE JposEntries PUBLIC "-//JavaPOS//DTD//EN"
"jpos/res/jcl.dtd">
<JposEntries>
<!--Saved by JavaPOS jpos.config/loader (JCL) version 2.2.0 on 26.04.17 16:15-->
<JposEntry logicalName="CashDrawer">
<creation factoryClass="jp.co.epson.uposcommon.creator.EpsonJposServiceInstanceFactory" serviceClass="jp.co.epson.upos.H6000IV.drw.StandardService"/>
<vendor name="SEIKO EPSON" url="http://www.epson.com"/>
<jpos category="CashDrawer" version="1.14"/>
<product description="EPSON Standard CashDrawer Device Service" name="EPSON Services for JavaPOS(TM) Standard" url="http://www.epson.com"/>
<!--Other non JavaPOS required property (mostly vendor properties and bus specific properties i.e. RS232 )-->
<prop name="OutputTimeout" type="String" value="500"/>
<prop name="epson.trace.file" type="String" value="trace.log"/>
<prop name="OutputBufferSize" type="String" value="4096"/>
<prop name="PinNumber" type="String" value="0"/>
<prop name="OfflineExecutionDevice" type="String" value="1"/>
<prop name="ConfigurationFile" type="String" value="epson/xml/Setting/TM-H6000IVSetting.xml"/>
<prop name="WriteThreadInterval" type="String" value="-1"/>
<prop name="TransmitRetryTime" type="String" value="100"/>
<prop name="DeviceID" type="String" value="36"/>
<prop name="SupportStatistics" type="String" value="1"/>
<prop name="QueuingOfflineTimeout" type="String" value="1000"/>
<prop name="MultiDrawerStatusSupport" type="String" value="0"/>
<prop name="EPurasSupport" type="String" value="TRUE"/>
<prop name="ReceiveRetryTime" type="String" value="25"/>
<prop name="TransmitTimeout" type="String" value="5000"/>
<prop name="Parity" type="String" value="0"/>
<prop name="StopBits" type="String" value="0"/>
<prop name="MemorySwitch" type="String" value="0"/>
<prop name="FlowType" type="String" value="1"/>
<prop name="InputTimeout" type="String" value="100"/>
<prop name="PulseOFFTime" type="String" value="400"/>
<prop name="LogicalPortName" type="String" value="ESDPRT001"/>
<prop name="StatusThreadInterval" type="String" value="100"/>
<prop name="DefaultSlpClampTime" type="String" value="0"/>
<prop name="LogicalPortInterfaceName" type="String" value="EPuras"/>
<prop name="OfflineRetryIntervalTime" type="String" value="25"/>
<prop name="BitLength" type="String" value="8"/>
<prop name="OfflineCount" type="String" value="2"/>
<prop name="PortType" type="String" value="0"/>
<prop name="InitializeThreadTime" type="String" value="1000"/>
<prop name="PortInterfaceName" type="String" value="Serial"/>
<prop name="PhysicalPrinterName" type="String" value="TM-H6000IV"/>
<prop name="LogObject" type="String" value=""/>
<prop name="PulseONTime" type="String" value="100"/>
<prop name="ForceSend" type="String" value="0"/>
<prop name="PulseStep" type="String" value="100"/>
<prop name="DeviceDesc" type="String" value="EPSON Standard CashDrawer"/>
<prop name="PortName" type="String" value="COM1"/>
<prop name="OpenPulseLevel" type="String" value="0"/>
<prop name="OpenWaitTimeout" type="String" value="5000"/>
<prop name="ReceiveTimeout" type="String" value="1000"/>
<prop name="InitializeResponseTimeout" type="String" value="1000"/>
<prop name="InputBufferSize" type="String" value="84"/>
<prop name="OfflineExecutionInitializeSetting" type="String" value="0"/>
<prop name="PhysicalDevice" type="String" value="Standard"/>
<prop name="Upos.Spec_c" type="String" value="false"/>
<prop name="ReadThreadInterval" type="String" value="-1"/>
<prop name="BaudRate" type="String" value="19200"/>
<prop name="epson.tracing" type="String" value="false"/>
<prop name="DeviceType" type="String" value="1"/>
<prop name="epson.trace.max.size" type="String" value="1000"/>
<prop name="Upos.USB_Serial" type="String" value="false"/>
</JposEntry>
<JposEntry logicalName="LineDisplay">
<creation factoryClass="jp.co.epson.uposcommon.creator.EpsonJposServiceInstanceFactory" serviceClass="jp.co.epson.upos.H6000IV.disp.DMD110Service"/>
<vendor name="SEIKO EPSON" url="http://www.epson.com"/>
<jpos category="LineDisplay" version="1.14"/>
<product description="Unknown Product Description" name="EPSON Services for JavaPOS(TM) Standard" url="http://www.epson.com"/>
<!--Other non JavaPOS required property (mostly vendor properties and bus specific properties i.e. RS232 )-->
<prop name="OutputTimeout" type="String" value="500"/>
<prop name="epson.trace.file" type="String" value="trace.log"/>
<prop name="OutputBufferSize" type="String" value="4096"/>
<prop name="OfflineExecutionDevice" type="String" value="1"/>
<prop name="ConfigurationFile" type="String" value="epson/xml/Setting/DM-D110(v1_14_0001)Setting.xml"/>
<prop name="WriteThreadInterval" type="String" value="-1"/>
<prop name="TransmitRetryTime" type="String" value="100"/>
<prop name="DeviceID" type="String" value="36"/>
<prop name="SupportStatistics" type="String" value="1"/>
<prop name="QueuingOfflineTimeout" type="String" value="1000"/>
<prop name="EPurasSupport" type="String" value="TRUE"/>
<prop name="ReceiveRetryTime" type="String" value="25"/>
<prop name="TransmitTimeout" type="String" value="5000"/>
<prop name="Parity" type="String" value="0"/>
<prop name="StopBits" type="String" value="0"/>
<prop name="MemorySwitch" type="String" value="0"/>
<prop name="FlowType" type="String" value="1"/>
<prop name="InputTimeout" type="String" value="100"/>
<prop name="CharacterMode" type="String" value="0"/>
<prop name="LogicalPortName" type="String" value="ESDPRT001"/>
<prop name="StatusThreadInterval" type="String" value="100"/>
<prop name="DefaultSlpClampTime" type="String" value="0"/>
<prop name="LogicalPortInterfaceName" type="String" value="EPuras"/>
<prop name="OfflineRetryIntervalTime" type="String" value="25"/>
<prop name="BitLength" type="String" value="8"/>
<prop name="OfflineCount" type="String" value="2"/>
<prop name="PortType" type="String" value="0"/>
<prop name="InitializeThreadTime" type="String" value="1000"/>
<prop name="ConnectionType" type="String" value="1"/>
<prop name="GraphicWindowLogicalArea" type="String" value="0"/>
<prop name="PortInterfaceName" type="String" value="Serial"/>
<prop name="PhysicalPrinterName" type="String" value="TM-H6000IV"/>
<prop name="LogObject" type="String" value=""/>
<prop name="DirectIOEventTimeout" type="String" value="5000"/>
<prop name="DeviceDesc" type="String" value="EPSON DM-D110 LineDisplay"/>
<prop name="PortName" type="String" value="COM1"/>
<prop name="ReceiveTimeout" type="String" value="1000"/>
<prop name="InitializeResponseTimeout" type="String" value="1000"/>
<prop name="InputBufferSize" type="String" value="84"/>
<prop name="TwoByteCharacter" type="String" value="0"/>
<prop name="OfflineExecutionInitializeSetting" type="String" value="0"/>
<prop name="PhysicalDevice" type="String" value="DM-D110"/>
<prop name="Upos.Spec_c" type="String" value="false"/>
<prop name="ReadThreadInterval" type="String" value="-1"/>
<prop name="BaudRate" type="String" value="19200"/>
<prop name="epson.tracing" type="String" value="false"/>
<prop name="DeviceType" type="String" value="2"/>
<prop name="epson.trace.max.size" type="String" value="1000"/>
<prop name="Upos.USB_Serial" type="String" value="false"/>
<prop name="PrinterConfigurationFile" type="String" value="epson/xml/Setting/TM-H6000IVSetting.xml"/>
</JposEntry>
<JposEntry logicalName="POSPrinter">
<creation factoryClass="jp.co.epson.uposcommon.creator.EpsonJposServiceInstanceFactory" serviceClass="jp.co.epson.upos.H6000IV.pntr.H6000IVService"/>
<vendor name="SEIKO EPSON" url="http://www.epson.com"/>
<jpos category="POSPrinter" version="1.14"/>
<product description="EPSON TM-H6000IV Printer Device Service" name="EPSON Services for JavaPOS(TM) Standard" url="http://www.epson.com"/>
<!--Other non JavaPOS required property (mostly vendor properties and bus specific properties i.e. RS232 )-->
<prop name="FlowType" type="String" value="1"/>
<prop name="Halftone" type="String" value="0"/>
<prop name="PhysicalPrinterName" type="String" value="TM-H6000IV"/>
<prop name="NVRAMControlLevel" type="String" value="1"/>
<prop name="LogicalPortName" type="String" value="ESDPRT001"/>
<prop name="Stamp" type="String" value="0"/>
<prop name="OutputCompleteType" type="String" value="2"/>
<prop name="StatusThreadInterval" type="String" value="100"/>
<prop name="OutputTimeout" type="String" value="500"/>
<prop name="PortType" type="String" value="0"/>
<prop name="epson.trace.detail.file" type="String" value="detail.log"/>
<prop name="OutputBufferSize" type="String" value="4096"/>
<prop name="UsedNVRAM" type="String" value="0"/>
<prop name="FirmRecordLog" type="String" value="1"/>
<prop name="ReceiveTimeout" type="String" value="1000"/>
<prop name="SlpReverseEject" type="String" value="0"/>
<prop name="PortName" type="String" value="COM1"/>
<prop name="OfflineRetryIntervalTime" type="String" value="25"/>
<prop name="Upos.USB_Serial" type="String" value="false"/>
<prop name="DefaultSlpClampTime" type="String" value="500"/>
<prop name="OfflineExecutionDevice" type="String" value="1"/>
<prop name="epson.trace.file" type="String" value="trace.log"/>
<prop name="StopBits" type="String" value="0"/>
<prop name="AsyncProcessingSize" type="String" value="2"/>
<prop name="RecCharactersPerLine" type="String" value="42"/>
<prop name="KanjiTwoWaysPrint" type="String" value="0"/>
<prop name="PulseStep" type="String" value="100"/>
<prop name="PortInterfaceName" type="String" value="Serial"/>
<prop name="GradationMethod" type="String" value="0"/>
<prop name="OfflineExecutionInitializeSetting" type="String" value="0"/>
<prop name="U375Compatible" type="String" value="0"/>
<prop name="BitLength" type="String" value="8"/>
<prop name="Parity" type="String" value="0"/>
<prop name="preCutterFunction" type="String" value="0"/>
<prop name="epson.tracing" type="String" value="false"/>
<prop name="epson.trace.max.size" type="String" value="1000"/>
<prop name="RecPaperSize" type="String" value="80"/>
<prop name="DeviceDesc" type="String" value="EPSON TM-H6000IV POSPrinter"/>
<prop name="PageModeExt" type="String" value="0"/>
<prop name="RecLineSpacing" type="String" value="30"/>
<prop name="SupportStatistics" type="String" value="1"/>
<prop name="FirmProgressRange" type="String" value="10"/>
<prop name="OutputErrorOption" type="String" value="0"/>
<prop name="EndorseLineSpacing" type="String" value="10"/>
<prop name="SupportFirmware" type="String" value="0"/>
<prop name="DeviceID" type="String" value="36"/>
<prop name="SlipPaperType" type="String" value="2"/>
<prop name="InputTimeout" type="String" value="100"/>
<prop name="SlipCharactersPerLine" type="String" value="45"/>
<prop name="AutoPowerOff" type="String" value="0"/>
<prop name="SlpMoreColumns" type="String" value="0"/>
<prop name="RecPaperType" type="String" value="0"/>
<prop name="MemorySwitch" type="String" value="0"/>
<prop name="ReadThreadInterval" type="String" value="-1"/>
<prop name="QueuingOfflineTimeout" type="String" value="1000"/>
<prop name="InitializeThreadTime" type="String" value="1000"/>
<prop name="TwoColor" type="String" value="0"/>
<prop name="BaudRate" type="String" value="19200"/>
<prop name="TwoByteCharacter" type="String" value="0"/>
<prop name="FirmLogFileSize" type="String" value="1000"/>
<prop name="Peeler" type="String" value="0"/>
<prop name="DefaultCodePage" type="String" value="997"/>
<prop name="epson.trace.detail.max.size" type="String" value="0"/>
<prop name="ConfigurationFile" type="String" value="epson/xml/Setting/TM-H6000IVSetting.xml"/>
<prop name="DeviceType" type="String" value="1"/>
<prop name="Custom1Color" type="String" value="0xFF0000"/>
<prop name="preEndorseFunction" type="String" value="0"/>
<prop name="Upos.Spec_c" type="String" value="false"/>
<prop name="LogicalPortInterfaceName" type="String" value="EPuras"/>
<prop name="FirmNotifyAllProgressEvents" type="String" value="0"/>
<prop name="InitializeResponseTimeout" type="String" value="1000"/>
<prop name="ReceiveRetryTime" type="String" value="25"/>
<prop name="UsedInterCharacterSet" type="String" value="0"/>
<prop name="PrinterTransmitTimeout" type="String" value="30000"/>
<prop name="RecMoreColumns" type="String" value="0"/>
<prop name="EndorseFontMode" type="String" value="1"/>
<prop name="WriteThreadInterval" type="String" value="-1"/>
<prop name="preORCBFunction" type="String" value="0"/>
<prop name="EndorseCharactersPerLine" type="String" value="40"/>
<prop name="RecNearEndSensor" type="String" value="1"/>
<prop name="LogObject" type="String" value=""/>
<prop name="Cutter" type="String" value="1"/>
<prop name="PhysicalDevice" type="String" value="TM-H6000IV"/>
<prop name="UsedPeeler" type="String" value="0"/>
<prop name="FirmLogFileName" type="String" value="Firmware.log"/>
<prop name="InputBufferSize" type="String" value="84"/>
<prop name="TransmitTimeout" type="String" value="5000"/>
<prop name="SlipLineSpacing" type="String" value="12"/>
<prop name="EPurasSupport" type="String" value="TRUE"/>
<prop name="OfflineCount" type="String" value="2"/>
<prop name="TransmitRetryTime" type="String" value="100"/>
<prop name="DirectIOEventTimeout" type="String" value="5000"/>
<prop name="epson.trace.detail.info" type="String" value="0"/>
</JposEntry>
</JposEntries>
STAR Printer and Cashdrawer (network connected)
At the time beeing, STAR printers are only supported with Ethernet connections.
The javaPos configuration looks like
<JposEntry logicalName="POSPrinter">
<creation factoryClass="com.starmicronics.starjavapos.ServiceInstanceFactory" serviceClass="com.starmicronics.starjavapos.POSPrinterService" />
<vendor name="Star Micronics" url="www.star-m.jp/eng/index.htm" />
<jpos category="POSPrinter" version="1.13" />
<product description="Star receipt printer" name="Star Micronics POSPrinter controller" url="www.star-m.jp/eng/index.htm" />
<prop name="model" type="String" value="SP700" />
<prop name="portName" type="String" value="tcp:10.1.15.20" />
<prop name="portSettings" type="String" value="" />
<prop name="ioTimeoutMillis" type="Integer" value="5000" />
<prop name="doCheckedBlockPrinting" type="Boolean" value="True" />
<prop name="useNVBitImage" type="Boolean" value="False" />
</JposEntry>
<JposEntry logicalName="CashDrawer">
<creation factoryClass="com.starmicronics.starjavapos.ServiceInstanceFactory" serviceClass="com.starmicronics.starjavapos.CashDrawerService" />
<vendor name="Star Micronics" url="www.star-m.jp/eng/index.htm" />
<jpos category="CashDrawer" version="1.13" />
<product description="Printer controlled cash drawer" name="Star Micronics cash drawer controller" url="www.star-m.jp/eng/index.htm" />
<prop name="portName" type="String" value="tcp:10.1.15.20" />
<prop name="portSettings" type="String" value="" />
<prop name="ioTimeoutMillis" type="Integer" value="5000" />
<prop name="controlPrimaryDrawer" type="Boolean" value="True" />
<prop name="firePulseWidth" type="Long" value="200" />
<prop name="sleepPulseWidth" type="Long" value="200" />
<prop name="capStatus" type="Boolean" value="True" />
<prop name="signalLevelHighWhenDrawerOpen" type="Boolean" value="True" />
</JposEntry>
Common settings for all JavaPos peripherals
- In Eclipse open Window->Preferences->OSBP Application Configuration
- Select the product to be configured in the field Product Configuration
- In the tab External Data Sources put the noted path in the field JavaPOS Configuration
